100/300/500W LED Digital Aquarium Heater Submersible Heating Rod Fish Tank 350Ga

Description: 100/300/500W LED Digital Aquarium Heater Submersible Heating Rod Fish Tank 350Ga Titanium alloy Tube Features:*Suitable for Fish Tank 250-350L-voltage 110V, power 500W, heater rod length 12.6inch/32cm. The controller power cord length 5.5ft/170cm.*Very easy and reliable to use. After well installing the aquarium heater and the thermometer, you just need to set the desired heating temp, then it can ensure the temperature constant at the set point with the blue indicator light,as it can adjust heating power automatically if there is any water temperature variation.*Made of Durable Titanium alloy Tube-Our seawater resistant titanium aquarium heater is good for use both in salt water and fresh water, long service life. *Antiflaming heater cover can prevent fish from going too close to the heater.*Very compact small size, easy to hide in the tank. Comes with 2 suction cups to keep the heater in place of tank.*There is indicator light to show the heating status on the LED screen through the temperature control. You can long-press the 'Set' key to shift degree unit between Celsius and Fahrenheit.*ON/OFF switch and Adjustable temperature controller.*Suitable Temperature to Set for fish -With the thermostat controller you can set the temp from 68℉to 94℉*Double sensing probes on the top of heater provide more precise induction.Warning Notes:1.Please use the heater in the water,when it is exposed in the air,the after-heat may cause damage to the heater or finally make it broken.2.After you have cut the power,please wait at least 20mins until you can put it out.3.Do not use the heater in corrosive environment.4.The heater can be set inside the tank vertically and horizontally,but please put all the heater inside the water.5.It only starts heating when it has gone 2 degrees below the set temperature(For example,if you want to get to the 26-27℃ range,you should set at 28-29℃)Error code and LED display:-Blue light:The temp have reach the goal,now the heater will keep it.-Red light:The heater is now heating.-E1:Water shortage or wrong installation-E2:The temp went over 94℉，the heater will now stop heating-E6:The temp went over 96℉，the heater will now stop heatingSpecifications:Materials:Titanium alloyColor:BlackPower:500WVoltage:110VFits Fish tank size:100-120cmSuits for Water Volume:250-350LHeater length:32cm diameter:23mmPower cord length:1.7mTemperature control range:68℉-94℉/20-34℃Waterproof level:IP68Package includes:Aquarium Heater*1(with power cord & plug)User manual*1Suction cups*2 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Stainless steel Tube Features:*Suitable for Fish Tank 250-350L-voltage 110V, power 500W, heater rod length 12.6inch/32cm. The controller power cord length 5.5ft/170cm.*Very easy and reliable to use. After well installing the aquarium heater and the thermometer, you just need to set the desired heating temp, then it can ensure the temperature constant at the set point with the blue indicator light,as it can adjust heating power automatically if there is any water temperature variation.*Made of Durable Stainless steel Tube-Our seawater resistant steel aquarium heater is good for use both in salt water and fresh water, long service life. *Antiflaming heater cover can prevent fish from going too close to the heater.*Very compact small size, easy to hide in the tank. Comes with 2 suction cups to keep the heater in place of tank.*There is indicator light to show the heating status on the LED screen through the temperature control. You can long-press the 'Set' key to shift degree unit between Celsius and Fahrenheit.*ON/OFF switch and Adjustable temperature controller.*Suitable Temperature to Set for fish -With the thermostat controller you can set the temp from 68℉to 94℉*Double sensing probes on the top of heater provide more precise induction.Warning Notes:1.Please use the heater in the water,when it is exposed in the air,the after-heat may cause damage to the heater or finally make it broken.2.After you have cut the power,please wait at least 20mins until you can put it out.3.Do not use the heater in corrosive environment.4.The heater can be set inside the tank vertically and horizontally,but please put all the heater inside the water.5.It only starts heating when it has gone 2 degrees below the set temperature(For example,if you want to get to the 26-27℃ range,you should set at 28-29℃)Error code and LED display:-Blue light:The temp have reach the goal,now the heater will keep it.-Red light:The heater is now heating.-E1:Water shortage or wrong installation-E2:The temp went over 94℉，the heater will now stop heating-E6:The temp went over 96℉，the heater will now stop heatingSpecifications:Materials:Stainless steelColor:SilverPower:500WVoltage:110VFits Fish tank size:100-120cmSuits for Water Volume:250-350LHeater length:32cm diameter:23mmPower cord length:1.7mTemperature control range:68℉-94℉/20-34℃Waterproof level:IP68Package includes:Aquarium Heater*1(with power cord & plug)User manual*1Suction cups*2 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Mini Aquarium Heater Features:*Suitable for Fish Tank 200L-voltage 110V, power 200W.*External temperature control,more safe and convenient to use. *Auto Thermostat-After well installing the aquarium heater and the thermometer, you just need to set the desired heating temp, then it can ensure the temperature constant at the set point with the indicator light,as it can adjust heating power automatically if there is any water temperature variation.*Made of made of explosion-proof shatterproof shield-proof quartz glass and protective sleeve, with high heat transfer efficiency performance, high temperature resistant flame retardant, fast heat transfer and long service life.*Very compact small size, easy to hide in the tank. Comes with 2 suction cups to keep the heater in place of tank.*Can be used both in salt water and fresh water, long service life. *There are LED indicators to show the heating status on the LED display through the external temperature control,which is easy know and reading the temp. You can long-press the 'Set' key to shift degree unit between Celsius and Fahrenheit.*ON/OFF switch and Adjustable temperature controller.*Digital accurate temperature control -With the thermostat controller you can set the temp from 68℉to 94℉Warning Notes:1.Please use the heater in the water,when it is exposed in the air,the after-heat may cause damage to the heater or finally make it broken.2.After you have cut the power,please wait at least 30mins until you can put it out.3.Do not use the heater in corrosive environment.4.The heater can be set inside the tank vertically and horizontally,but please put all the heater inside the water.Error code and LED display:-Blue light:The temp have reach the goal,now the heater will keep it.-Red light:The heater is now heating.-E1:Water shortage or wrong installation-E2:The temp went over 94℉，the heater will now stop heating-E6:The temp went over 96℉，the heater will now stop heatingSpecifications:Main Material: Durable quartz glass and PlasticColor:BlackPower:200WVoltage:110VFits Fish tank size: 50-80cmSuits for Water Volume:200LHeater dimension:12.5*6.5*3cmPower cord length:1.7mTemperature control range:68℉-94℉/20-34℃Waterproof level:IP68Package includes:Mini Aquarium Heater*1(with power cord & plug & Suction cups*2)User manual*1 ------------------------------------------------------------------------------------------------------------------------------------------------- Quartz Tube Description:Quartz tube diameter: 23.8mm; Casing tube diameter: 33mmItem Length:26.5cmCable length: 1.5mWater Volume：30-50 litersPower：100WVoltage：110VFrequency: 60HZAdjustable temperature：20℃-34℃(68℉~94℉)Operation instruction: The heater should be immersed into water completely. It takes about 10~15 minutes to get used to the water temperature. Then adjust and set the desired temperature value 61℉-93℉. It starts to work if the actual temperature value is lower than the set value, unless it doesn't work.Features:a. Quartz glass of 2.0mm thickness, super shatterproofb. Fully sealed, completely submersible and water-proofc. Accurate temperature settingPackage includes: 1 x Heater ReturnDelivery detailsPaymentFAQ'sContact us Return If you found that the item was damaged when you get it, pls contact us firstly Delivery details We Ship to Payment address ONLY. Payment PayPal accepted. FAQ's None Contact us Welcome to contact us for any question.

Price: 28.61 USD

Location: Sayreville, New Jersey

End Time: 2024-01-11T04:38:22.000Z

Shipping Cost: 0 USD