1000x 10mL Headspace Vials Crimp Cap+0.45μm 25mm PTFE Syringe Filter Hydrophobic

Description: Product Description Membrane Solutions 10mL vials-glass clear headspace vial crimp top, flat bottom. These vials are made of borosilicate glass of uniform thickness, flat bottom for even heat distribution, resistant to high and low temperatures. Size: 22.5*46mm, the vial mouth outer diameter is 20mm, 20 mm crimp seal finish are designed to fit most headspace autosampler. Features: High-Quality Materials: The glass vials is made of high-quality borosilicate glass and has a thicker design, can withstand high and low temperatures from -200°C to 200°C (-328°F to 392°F), can be refrigerated, heated and boiled, and is not easy to break after falling. Can be reused after cleaning. Does not come with caps Beveled Finish Vial : Reduced the amount of sealing surface between the crimp seal and the glass surface,Also A bevelled top Headspace Neck might be required for some special closure systems. Flat Bottom Vial: when vials have to run within the instrument on a slightly downwards tendency and preferred for manual headspace autosamplers,Flat bottom maximizes heating efficiency. Size: The diameter of the sample bottle body is 22.5mm, the diameter of the bottle mouth is 20mm, the height of the sample bottle is 46mm. The volume is 10ml and the wall thickness of the vial is 1mm. Leak-Proof Design: The 20mm aluminum crimp top caps perfectly fit the glass bottle body, no matter you put it upside down or tilt, the liquid after sealing will not leak, and ensure that impurities will not enter at the same time. Wide Range of Applications: Our small glass vials have good sealing effect and easy to carry, it can be used in laboratories and homes and it is the best choices for storing various liquids and powders or conducting science education. It is suitable for most prevention and control autosamplers. like Aglient, Carlo Erba, DANI, CTC PAL(Varian, Gerstel, Atas, Shimadzu)Thermo Scientific, TriPlus HS, Fisons, SPME Vial for CTC PAL.Product Information:Vials--- Series Headspace Vial Top/Cap Type 20mm Crimp top/Bevelled Parts Vial Vial Volume(ml) 10 Color Clear Size 22.5*46mm Bottom Type Flat Vial Diameter 22.5±0.5mm Vial Height 46±0.5mm Screw Diameter 19.6±0.25mm Mouth Diameter 12.6±0.25mm Base thickness 0.8±0.2mm Glass Type 7.0 low boron Caps--- Thickness 3.0±0.2 Hardness 45°±5° Diameter 20.2±0.2 Cap Height 7.6±0.2 Cap Diameter 20.5±0.2 Septum Cleanliness Cleanliness Test(GC Head Space Test) HPLC Extractables Text No detectable peaks Silicone Colour white Membrane Colour white Cap Colour Silver Top/cap Type 20mm Crimp top Cap/Septum Sealing Sealing Test Heavy meatls and Arsenic release Content of Heavy metals and Arsenic is considerably below the limit values of European Ph. and China Ph. Note: 1. Small objects, please stay away from children under 3 years old. 2. The vials are NOT sterile, but they can be heated and boiled to be sterile. Temperature range: -200°C to 200°C(-328℉ to 392℉). 3. Resistant to pressure up to 600kPa to ensure cap stays on during volatile sample analysis. 4. Customer Service: If you have any questions about our products, please send us an email, we will reply you within 24 hours.Membrane Solutions Sterile PTFE 0.22μm 13mm, 0.45μm 13mm, 0.22μm 25mm, 0.45μm 25mm Syringe FiltersMembrane Solutions Membrane Solutions PTFE Syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs. High Water Flow Rates Polyethersulfone microporous membrane is a hydrophilic membrane with high flow rate, low dissolution, good strength, no adsorption of protein and extract, no pollution to samples. High Bubble Points MS filter withstands a maximum case pressure of 10 bar (145 psi) and the solution is 20% faster than comparable products High Throughput MS filter have a larger filter surface area increases the flow rate. It also reduces the pressure required to empty the syringe, making the filtration solution easier. Specifications:PTFE-B 0.45μm 25mmPart No.SFPTFE025045NBIFilter MediumPTFEOuter diameter of Filter (mm)30Filter Diameter (mm)25Pore Size(μm)0.45WettabilityHydrophobicSterileNoPrefilterPPFiltration Area(cm²)2.98Housing MaterialPPHoldup-Volume(μl)<100Volume Throughput(ml)<100Connections(Inlet/Outlet)Female Luer Lock inlet and Male Luer slip outletMax Operating Pressure(psi)87Max Operating Temperature(℃)130Application: HPLC sample preparation Routine QC analysis Content uniformity Removal of protein precipitates Dissolution testing Food analysis Biofuel analysis Environmental samplesPackage Included: PTFE Syringe Filters 10pcs: 10x PTFE Syringe Filters 100pcs: 100x PTFE Syringe Filters 1000pcs: 1000x PTFE Syringe Filters 10mL Clear Vials Caps 100pcs: 100x 10ml Clear Vials+100x 20mm Crimp top Caps 500pcs: 500x 10ml Clear Vials+500x 20mm Crimp top Caps 1000pcs: 1000x 10ml Clear Vials+1000x 20mm Crimp top Caps 10mL Clear Vials Only 100pcs: 100x 10ml Clear Vials 500pcs: 500x 10ml Clear Vials 1000pcs: 1000x 10ml Clear Vials 20mm Crimp Caps Only 100pcs: 100x 20mm Crimp Caps 500pcs: 500x 20mm Crimp Caps 1000pcs: 1000x 20mm Crimp Caps

Price: 7.99 USD

Location: Auburn, Washington

End Time: 2024-11-27T07:56:25.000Z

Shipping Cost: 0 USD