10 Tons Hydraulic Jack Pump Ram Cylinder Manual Hydraulic Hand Pump Low Profile

Description: 10 Tons Hydraulic Jack Pump Ram Cylinder Manual Hydraulic Hand Pump Low Profile 10T Hydraulic Ram Cylinder Jack Low Profile Porta Power Ram Single-Acting Mini Jack Ram with CP-180 Hydraulic Hand Pump 0.43" Stroke for Machinery Shipbuilding Description This 10T short jack with a hydraulic pump can convert manual mechanical energy into hydraulic energy. They are made of high-end steel, and corrosion resistant, making the whole machine smooth and easy to clean. In addition, it has a strong anti-strike ability, so it has high strength and is not easy to deform. It's very powerful, so you can use it easily. Application It can be used with hydraulic punches, hydraulic cutting machines, hydraulic cylinders, hydraulic tongs, etc. to perform various operations, such as lifting, bending, straightening, shearing, riveting, assembly, disassembly, etc. How to Use 1.Connect the jack to the quick coupler of the hydraulic pump. 2.Turn the pressure relief valve on the hydraulic pump clockwise. 3.Press the handle up and down. 4.Stop working when the stroke is in place. 5.Turn the relief valve counterclockwise. Specifications Name: Manual Hydraulic Pump Model: BSY-10 + CP-180 Color: Orange Material: Steel Surface Treatment: Plastic Spraying Condition: Brand New Type: Manual Oil Reserves: 350CC Maximum Pressure: 70Mpa（700kg/ cm²） Low-Pressure Speed: 2L/ s (0.44Gal/ s) High-Pressure Speed: 0.2L/ s (0.044Gal/ s) Tubing Connector: ZG3/8'' Jack Tonnage: 10T/ 22046lbs Jack Spindle Diameter: 38mm/ 1.5in Inner Diameter of Jack Cylinder: 45mm/ 1.77in Jack Stroke: 11mm/ 0.43in Jack Extension Height: 64mm/ 2.52in Pump Body Length: 33cm/ 13in Pump Body Height: 11cm/ 4.3in Handle Length: 34cm/ 13.4in Tube Length: 1m/ 3.3ft Lifting Jack Size: 8.3*6.5*5cm/ 3.3*2.6*2in Package Size: 37.5*22.5*16cm/ 14.76*8.86*6.3in Net Weight: 5kg/ 11.02lbs Gross Weight: 5.8kg/ 12.79lbs Package Included 1* Manual Hydraulic Pump 1* Lifting Jack 1* 1m Hose 1* Handle Key Features 1. Large Reservoir Capacity: It has a reservoir capacity of 350cc, so you can use it easily without frequent refilling. 2. User-friendly: The manual hydraulic pump has a long ergonomic operating handle for a smoother, more comfortable grip during use. Its thickened insulation feature also provides non-slip hand protection for long-term use. 3. Easy to Operate: Its structure is not complicated and does not require complicated installation and operation steps, so you can easily master it. As it is manual, it can continue to work without electricity, so it is very convenient to use. 4. Strong Power: The maximum working pressure of the hydraulic pump can reach 70Mpa, which is more powerful than other similar machines and more convenient to use. And its jack has a tonnage of 10T/22046lbs, providing you with stronger power. It not only has a smooth surface, but also has good sealing and no oil leakage. 5. Compact and Lightweight: Its proper size and weight (5kg/ 11.02lbs) allow it to follow you through various operations. 6. Durable Material: The item is made of steel, which is relatively strong and stable. It is also not easy to damage or rust under proper use and is very durable. 7. Smooth Surface: Its steel surface with plastic spraying can resist corrosion and does not rust. The smooth surface greatly reduces the friction between machines. 8. Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. Details 1. Steel Wire Joint Sheath: Its joint is equipped with steel wire protection, which can effectively avoid damage caused by excessive bending of the joint oil pipe so that it can be used for a long time. 2. Thickened Plunger: The thickened design of the plunger increases its wear resistance, which can effectively increase the service life of the manual hydraulic pump. 3. Dust Cover: The joints of the jack and hydraulic pump are equipped with a dust cover to prevent dust from entering and damaging them when not in use. 4. High-pressure Oil Pipe: It adopts a high-pressure oil pipe (1m/ 3.3ft) and attaches a quick joint（ZG3/8''）, which makes it convenient and fast for you to use. 5. Anti-slip Ring: The main shaft of the jack is designed with an anti-slip ring so that it has better anti-slip and wear resistance so that you can use it for a long time. 6. Stop Ring: A stop ring is designed between the main shaft and the housing to protect the main shaft from breakage and damage under load. 7. Chrome-plated Main Shaft: The main shaft of the jack has been chrome plated to make it smooth and not easy to jam the cylinder, thus extending its service life. Notes 1.Please note that there is a pressure-reducing valve on the cylinder head, which should be loosened during use to avoid sealing the hydraulic cylinder. 2.Please note that the bearing surface needs to be hard and flat. 3.When using, please do not bias the load, and stop the operation immediately when you see the stop line. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.BrandUnbrandedMPNDoes not applyHydraulic Pump TypeHydraulic Hand PumpPump ActionSingle ActingPower SourcePneumaticRated Pressure70MpaUPCDoes not applyOn Nov 20, 2024 at 02:09:36 PST, seller added the following information:

Price: 92.08 USD

Location: Chino, California

End Time: 2024-12-20T08:37:55.000Z

Shipping Cost: 0 USD