Description: Excellent condition. Used for 5K miles. No Fuel flow issues. Buyers are responsible to make sure these injectors work for their own application. Please check fitment prior to bidding/buying. LISTING PRICE IS FOR SINGLE INJECTOR Genuine Siemens Deka 60lb High Impedance Fuel Injector (1) Pc These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow. FeaturesGenuine, reliable Siemens InjectorsStandard Long Length: 60mm o-ring to o-ring Excellent response characteristicsRobust DesignHigh ImpedanceLow Impedance performance characteristics with High Impedance CompatibilitySpecificationsCoil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/minStatic Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/minGain: 0.11ms/mgOffset: 0.055msTurn on time @ 14VDC: 1.14msTurn off time: 0.85ms @ 600KPaConnector: Bosch EV1Series: DEKA 4 ( DEKA IV )Orifice Type: Multi-orificeSpray Pattern: 30 Degree Spray ConeFactory fitted with Viton upper and lower o-rings "This product may NOT be legal for sale, installation, or use on a pollution controlled vehicle in the state of California. This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions for Off Road Use Only.” If the item prohibits the sale in the state of California per (CARB) manufacture listing, the purchase will be notified and refunded. Please consult with in the state's guidelines further product information before purchase.
Price: 40 USD
Location: Oviedo, Florida
End Time: 2024-11-12T23:46:11.000Z
Shipping Cost: 11 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Type: Fuel Injector
Brand: Siemens
Manufacturer Part Number: 107961
